How to Measure

Use this guide before you request a quote. Grab a tape measure, measure to the nearest 1/16", and add your numbers and photos to your quote request. Have a sketch or drawing of your idea? Send it too.

Start Your Project →LidsSumps

Custom Aquarium Lids

Every BunkerShop lid is made from cast acrylic, cut and engraved in-house.

HOW TO MEASURE YOUR TANK FOR A CUSTOM LIDUse a tape measure • Measure to the nearest 1/16″ • Send these numbers + photos with your quote requestBUNKERSHOPCustom Aquarium EquipmentSTEP 1 — MEASURE THE TOP OF THE TANKOVERFLOWRETURNHEATERA OUTSIDE LENGTHouter left edge → outer right edgeB WIDTHouter front→ outer backE DISTANCE FROM LEFT EDGEto the overflow, nozzles, heater, cordsCDD RIM / BRACE WIDTHonly if your tank has a rimC WALL THICKNESSglass / acrylic at the top edgeCLOSE-UP OF TOP CORNERSTEP 2 — HOW SHOULD THE LID SIT?ON TOPrests on the glass,overhangs slightlySTEP LID (FLUSH)flush with outside edge,lip drops inside the glassDROP-INsits inside, on abrace or clipsAlso tell us: hinged or fully removable?STEP 3 — MARK YOUR CUTOUTSBACK OF TANK (top view of lid)FRONT OF TANKcable holesoverflow cutoutfeed holefrom LEFT edgeFor each cutout: size + distance from the LEFT edgeCable holes • feeding hole • overflow • light brackets • ATO sensorSTEP 4 — SEND US 3 PHOTOS + YOUR DETAILS1. STRAIGHT DOWNWhole top of the tank,from directly above2. EACH CORNERClose-up with the tapemeasure in the shot3. BACK OF TANKCords, plumbing andanything on the rimALSO TELL US• Your light (brand / model) + height above water• Color: clear, black or a mix• Engraving: name, initial or logo• Hinged or fully removableAdd A–E, your cutouts and photos to your quote request — we’ll send your quote.contact@bunkershops.com • 786-334-3328 • bunkershops.com

← Swipe sideways to see the full guide →

A Outside length  •  B Outside width  •  C Glass/acrylic thickness  •  D Rim or brace width (if any)  •  E Distance from the left edge to the overflow, nozzles, heater and cords

Lid styles: On Top rests on the glass and overhangs slightly. Step Lid (Flush): the top sits flush with the outside of your tank and a lip underneath drops just inside the glass so it stays in place. Drop-In sits inside the tank on a brace or clips.

Rimless tank? Choose On Top or Step Lid (Flush). Drop-In lids need a brace or clips to rest on.

Lighting: tell us your light's brand and model. If it mounts to the tank or rim, tell us where so we can add a lighting cutout or notch. If it hangs above, tell us how high it sits above the water.

Photos: top of the tank from straight above, each corner with the tape measure in the shot, and the back of the tank.

Custom Sumps

HOW TO MEASURE FOR A CUSTOM SUMPUse a tape measure • Measure to the nearest 1/16″ • Send these numbers + photos with your quote requestBUNKERSHOPCustom Aquarium EquipmentSTEP 1 — MEASURE YOUR STAND / CABINET⚠ D + E matter most: the sump must fit through the doorPLUMBINGA INSIDE WIDTHleft inside wall → right inside wallF OBSTACLESpipes, braces, center post — distance from leftC INSIDE HEIGHTfloor → underside of topB INSIDE DEPTHfront → back wallD DOOR OPENING WIDTHmeasure the narrowest point — hinges and frame includedE OPENINGHEIGHTbottom rail →top railSTEP 2 — WHAT GOES INSIDE?TOP VIEW — EXAMPLE LAYOUT (we build it your way)DRAINfilter sock /rollerSKIMMERREFUGIUM(optional)RETURNpumpWATER FLOWSend brand + model of your skimmer, return pump,reactors and filter roller — we size chambers around themSTEP 3 — YOUR PLUMBINGTANK (above)SUMP (side view)DRAINShow many? size (1″ / 1.5″)?enter LEFT, RIGHT or CENTER?RETURNsize +which sideAlso: ATO reservoir built in? Max water level you want?STEP 4 — SEND US 3 PHOTOS + YOUR DETAILS1. CABINET FRONTDoors open, wholeopening in the shot2. INSIDETape measure across thedoor opening + inside3. PLUMBINGDrains + return comingdown from the tankALSO TELL US• Tank size: gallons + dimensions (L × W × H)• Acrylic: clear, black or a color mix• Chambers / features you want + when you need it• Have a sketch or drawing? Send it too!Add A–F, your equipment list and photos to your quote request — we’ll send your quote.contact@bunkershops.com • 786-334-3328 • bunkershops.com

← Swipe sideways to see the full guide →

A Inside width  •  B Inside depth  •  C Inside height  •  D Door opening width  •  E Door opening height  •  F Pipes, braces or posts (distance from left)

Important: your sump has to fit through the cabinet door, so D and E matter most. Tell us your skimmer, return pump, reactors and filter roller (brand and model), how many drains and their size, and which side they come in.

Photos: cabinet front with doors open, inside with a tape measure across the opening, and the plumbing under the tank. Have a sketch of your idea? Send it too, and still follow the guide so we have your numbers.

Ready? Start Your Project →